Table of Contents
Advertisement
Installation and wiring
Installation
The LCD Touch Switch is designed to be mounted using standard electrical mounting accessories. For
example, a Clipsal® 154 mounting bracket or 157 wall box, as shown below.
Mounting Bracket
Examples of typical standard electrical mounting accessories suitable for mounting the LCD Touch Switch
The LCD Touch Switch can be installed as follows
Install the LCD Touch Switch Back Plate on the wall using an appropriate mounting accessory
•
Connect the RJ-45 on the supplied adaptor cable into the rear of the front LCD Touch Switch
•
module (see wiring section below)
The front LCD Touch Switch assembly can then be clipped into the Back Plate
•
LCD Touch Switch
One Gang Wall Box
Page | 3
Advertisement
Table of Contents
