Related Manuals for Diginet DGOZ-TCSW-LR35
Summary of Contents for Diginet DGOZ-TCSW-LR35
- Page 1 Installation Guide DGOZ-TCSW-LR35 LCD Touch Switch Wall mounted control interface for the RAPIX™ Lighting Control System Designed in Australia to meet Australian Standards and installation conditions WWW.DIGINET.NET.AU...
-
Page 2: Important Notes
If you require information or assistance regarding the installation or operation of this product, contact Technical Services at Diginet Control Systems. Contact details are provided on the back cover of this guide and also at www.diginet.net.au Product summary The LCD Touch Switch provides a wall mounted control interface for the RAPIX™... -
Page 3: Installation And Wiring
LCD Touch Switch Installation and wiring Installation The LCD Touch Switch is designed to be mounted using standard electrical mounting accessories. For example, a Clipsal® 154 mounting bracket or 157 wall box, as shown below. Mounting Bracket One Gang Wall Box Examples of typical standard electrical mounting accessories suitable for mounting the LCD Touch Switch The LCD Touch Switch can be installed as follows Install the LCD Touch Switch Back Plate on the wall using an appropriate mounting accessory... - Page 4 LCD Touch Switch Interconnections This product must only be used in conjunction with a Diginet RAPIX™ Lighting Control System and connected as highlighted in this guide. The LCD Touch Switch is connected to any of the four smart device ports on a RAPIX™ eHub. Up to 100m of standard Cat 5 / Cat5e cable can be used, with the appropriate patch lead / adaptor lead at each end (see next page for details).
- Page 5 The eHub powers the LCD Touch Switch via the above Cat 5/5e connection. The LCD Touch Switch does not require a separate power supply. Configuring and Commissioning The LCD Touch Switch is configured using RAPIX™ Integrator Software. Contact Diginet for further details. Specifications and standards compliance Product specifications Screen Size 3.5”...
- Page 6 LCD Touch Switch Dimensions Standards and compliance The LCD Touch Switch is designed to meet/exceed the following Australian and International standards. Australian/New Zealand EMC and Electrical Safety Frameworks and Standards Regulation Standard Title AS/NZS CISPR 22:2009 Information Technology Equipment – Radio CISPR15 Disturbance Characteristics –...
-
Page 7: Product Warranty
LCD Touch Switch Product warranty This LCD Touch Switch, item number DGOZ-TCSW-LR35, has a two-year warranty against manufacturing defects in accordance with the following terms: Nothing in this Warranty affects any person's rights under the Australian Consumer Law. The benefits to any person under the Gerard Lighting Warranty are in addition to the rights and remedies available under any Consumer Guarantees. - Page 8 This user and installation guide is copyright to Gerard Lighting. Except as permitted under relevant law, no part of this user and installation guide may be reproduced by any process without written permission of and acknowledgement to Gerard Lighting Diginet is a brand of Gerard Lighting March 2017 Printed on recycled paper WWW.DIGINET.NET.AU...