Creating The Sr-Iov Port - Qlogic 3400 Series User Manual

5–Configuration Deployment with SR-IOV

Creating the SR-IOV Port

Creating the SR-IOV Port
To create the SR-IOV port:
1. Issue the following command to create an SR-IOV port:
# neutron port-create <sriov net id>
--binding:vnic-type direct --device_owner network:dhcp
Following is a sample output.
2. To show the port information, issue the following command:
# neutron port-show <ID>
Following is a sample output.
Make sure the output shows the correct vif_type and vnic_type.
--name
13
<port_name>
83840-546-02 B