Reset Radiators; Default Settings - VeriSmart EcoWifi 750W Installation And User Manual

Installation and user manual
2. Press "Prog" for 5 seconds.
3.The advanced settings are:
C1- Choose ºF or ºC.
C2- Choose type of control.
C3- Temperature Compensation.
C4- Firmware.
C5- Activation protection window open (turning off 30 minutes if a drop of 2.4 ºC is detected
in 4 minutes), is indicated by the icon:
C6- Adaptable heat anticipation. The radiator predicts the right moment to start heating in
order to reach the desired temperature according to the programmed schedule , so the user
do not need to take into account the time needed to heat the room.
Maximum anticipation time: 24h. Indicated with the symbol:
4. To select one of the three advanced settings (C1 to C5) use the [+] / [-] keys.
5. Choose the required mode by pressing "mode.
6. Press [+] / [-] buttons to change.
7. Press "mode" or "Prog" to confirm and exit.

Reset radiators

Press simultaneously "mode" and "Prog" for 10 seconds. The figure on the right appears.

Default settings

•Mode: OFF
•Tª comfort: 19ºC
•Tª eco: 17ºC
•Tª freeze: 5ºC
•Tª mode manual: 19ºC
•Temperature compensation Offset: 0ºC
Click on "mode" to confirm
•No RF link
•Temperature units ºC
•Open window detection: OFF
•Control mode: PID
•Program: All hours Eco
- -
8