Information; Very Important; Wall Mounting - VeriSmart EcoWifi 750W Installation And User Manual

Installation and user manual

INFORMATION

1. Very important!!

- Read the installation manual prior to installation of this unit!
- Read the user manual before putting this unit in operation!
- Observe the warnings in the manuals!
- The room you are installing the radiator in must adhere to the ventilation requirements!
- Installation must be by an authorised person only!
- The screws provided are not suitable for all types of walls, it's the installers responsibility to ensure
the correct screws are used for the type of wall the radiator in being fixed to.

2. Wall mounting

The radiator comes complete with an installation kit, comprising of the following:
- Screws, brackets and cardboard guide, (remove from the top of the box the radiator comes in).
Please follow the illustrated steps below to hang and install your radiator:
1. Take the radiator out of its packaging and choose where to hang it. Please note the minimum dis-
tances required around the heater (*1).
2. The flap of the box has the guide printed on it to place the radiator on the wall. You must make the
holes of the template to Drill and plug holes. (The height to which it is placed if guided by the template
is higher, if you want to place it lower respect the minimum distances).
3. Place the box against the wall and mark where the supports should be placed.
4. Drill and attach the plugs.
5. Screw the brackets to hold the radiator into place, using the screws and washers provided.
6. Place the wall spacer in the centre slot on the back of the radiator. Leave it on the bottom.
7. Place the radiators on the wall brackets.
(*1)
- -
10