Advertisement
Inside Vent
Framing Support
Lift Window
Open
58.
Locate Heat Activated Hinge. Heat Activated Hinge will require a basic assembly. Follow
Manufacturer's directions. Attach with Manufacturer's Hardware supplied. Phillips Head Driver will be
required. To install, open Window from the inside. Hinged Window will be marked for correct location
for Hinge. Attach Hinge Flant to Framing Support and Window Frame as illustrated above.
Important- Heat Activated Hinge will open only after the Greenhouse reached an inside temperature of
approximately 75 degrees Fahrenheit. Make sure Hinged Windows open easily and do not stick. We
recommend purchasing a thermometer once the Greenhouse is complete. Please monitor Heat Activated
Hinge to confirm it opens and is functioning correctly.
Toll Free 1-888-658-1658
Expert Advice
Place Heat Hinge in fridge for
an hour before installation.
Piston rod must be in closed
position prior to installing.
www.outdoorlivingtoday.com
Page 27
Support may neend to be adjusted so
hinge flange in Step 58 sits correctly.
57.
Locate and attach Part V - Inside Vent
Framing Supports - 3/4" x 2 1/2" x 49" with
6 - 2" screws. Position parallel with Hinged
Window. Before attaching, See Step 58 first.
Positon support so hinge positions correctly.
sales@outdoorlivingtoday.com
Marked
Flange
Advertisement
