Advertisement
Part O
King Stud.
31.
Locate Parts O & Q - King Stud and Gable Support Frame.
Using a tape measure, mark centers on bottoms of Horizontal Top Cap /
King Stud / Gable Support Frame. Center Gable Support on Cap and tack
together only with 2 - 2" screws. Center King Stud on Support Frame and
tack also with 1 - 3" screws. Complete both front and back pieces. In
Step 42., some adjustment may be required. Completely attach then.
Tack in screws to hold
in position. Complete
in Step 42.
Outside Roof Rafter
32.
Locate Part N - Outside Roof Rafters - 3 1/2" x 3 1/2" x 51". There are Left and
Right Rafters. Starting with a Right Rafter as configured above, lift up and position on Post.
Toll Free 1-888-658-1658
Part Q
Gable Support Frame.
Dado Cut
to inside.
Drilled
www.outdoorlivingtoday.com
Page 17
Mark Centers
sales@outdoorlivingtoday.com
Advertisement
