Carefree ALTITUDE Service Manual page 9

Carefree of Colorado
Motor
Frame
Front
Cover
14. Attach the gear box and motor to the frame using the three (3) motor mount screws removed previously.
15. Snap the rear cover onto the motor frame.
16. Align the roller tube and insert the shaft into the head. It may be necessary to rotate the roller tube to
align the flats of the shaft with the opening.
17. Ensure that the roller tube is fully inserted into the head. With the roller tube shaft
press the retaining clip onto the shaft. The clip goes in only when the shaft is fully inserted. Press the
clip until it is firmly seated in the groove of the roller tube shaft.
18. Attach the motor wires to the arm cable. Ensure that the wire colors match.
19. Snap the front cover onto the rear cover. Hang the cover on the top and swing down until it clicks.
20. Restore power and test.
070026-301
Service Manual
Rear
Cover
Gear Assy
Motor Assy
Motor Mount
Screws (x3)
A
Press In Retaining Clip
Access
Cover
Groove
Clip
FULLY INSERTED
LTITUDE
Alt018
,
7