Sharp LC-60H20T Service Manual page 13

LC-60H20T/LC-70H20T
[2] Removing of connectors & PWB
1.Disconnect the following connectors from Main Unit. (SP,RA,KM,LWwires)
2.Disconnect the following connectors from the POWER Unit.(PD,PL,LED wire)
3.Disconnect the following connectors from the LCD CONTROL Unit .(T-Con FFC wayer)
4.Remove 4screws [1]Main Unit ,remove 6 screws [2] Power unit & remove 4 screws [3]
T-CON board,remove 3 screws [4] cocoro eye
[2]
LED Wire
[2]
[2]
[2]
[PD] [PL]
[2]
[2]
[T-CON FFC wayer]
COCORO EYE
[KM]
[LW]
[4]
4 – 3
[LW]
[RB]