Balance; Volume Curve - THOMSON 22E92NH22 Service Manual

Pre-
table
Reset
TECI command
2)． Balance
Item

Balance

3)．Sound

Volume Curve

Item
Sound
Previous: power on according to last status
frequency HuiZhou/ Poland
Note:Pre-Frequency table(HuiZhou/ Poland)
Reset EEPROM data, and load the default value of EEPROM
All: clear NVM values，and set to default value。
User: Clear date of NVM in user menu, except the value of
Shop: Clear date of NVM in user menu, include the value related
Note:Priority below basic function of Factory menu
Sub-item
Source
Tone
Auto Color
White R
White G
White B
Gray R
Gray G
Gray B
Sub-item
VOL_0 0
VOL_10 2
VOL_50 14
VOL_90 135
VOL_100 255
language / related installation/Factory setting, then set to the
default value.
installation, and Clear date of factory menu except the item
of Balance and sound ,set to default value
For balance source
Note:Switch SOURCE used left/right key
Normal/Warm/Cool
Note: RGB gain range is 0-255
The value of Warm and cool is the
offset of Normal mode, their range is
-128－127, if the offset value beyond
the boundary，set to max or min
value.
Note:display the completed source name
on the right of item,If all the sourcs is
ok ,show "All"
R White balance
G White balance
B White balance
R Gray balance
G Gray balance
B Gray balance
Note:mapping volume value
to 0—255 of the MCU
register