Replacing front and rear
turn indicator bulbs
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screw 1.
Pull glass on screw connection
side out of mirror housing.
Remove bulb 2 from
light housing by turning it
counterclockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
with white turn indicators
RY10W / 12 V / 10 W
with LED turn indicators
LED / 12 V
To protect the glass of the
new bulb from soiling, only
handle it with a clean, dry cloth.
8
101
OE
OE
z
OE
OE