Table Of Contents; Description; Purpose Of This Manual - Greenlee 763 Instruction Manual

Table of Contents

Description ..................................................................... 2
Purpose of this Manual .................................................. 2
Important Safety Instructions ...................................... 3-4
Identification ................................................................... 5
Specifications ................................................................. 5
Operation ....................................................................... 6
Maintenance
General ...................................................................... 7
Cleaning the cutter ..................................................... 7
Lubricating the cutter ................................................. 7
Disassembly .............................................................. 8
Assembly .............................................................. 9-11
Exploded View ............................................................. 12
Parts List ...................................................................... 13

Description

Greenlee 763 and 764M4 Ratchet Cable Cutters are
non-insulated cutting tools intended for use on copper
and standard aluminum electrical cable. The 763 will
accommodate up to 500 MCM copper or 795 MCM
aluminum cable. The 764M4 will cut up to 750 MCM
copper or 795 MCM aluminum cable.
Both cable cutters ratchet and are equipped with fiber-
glass handles and rubber grips to limit operator fatigue.
They are not intended for use on ACSR (aluminum
cable, steel-reinforced) cable.
Greenlee / A Textron Company
763 and 764M4 Ratchet Cable Cutter
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose
This instruction manual is intended to familiarize person-
nel with the safe operation and maintenance procedures
for the following Greenlee 763 and 764M4 Cable Cutter.
Keep this manual available to all personnel.
Replacement manuals are available upon request
at no charge.
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
Loctite is a registered trademark of Loctite Corporation.
416 Super Bonder is a registered trademark of Loctite Corporation.
Molykote is a registered trademark of Dow Corning Corporation.
KEEP THIS MANUAL
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070