Samsung SDS SHS-P718 User Manual

Safety Cautions
Warning
SHS-P718
• The user shall not install or repair the
product without authorization.
• Do not install the product in the place
where the gap between the door and the
frame is 5mm or more.
• Make sure that no unauthorized person
has the access to the password.
• Do not operate the product with wet
hands, and keep liquids such as water
or drinks away from the product, or
the product may malfunction or be
damaged.
• Do not use the excessive force or sharp
BIOMETRICS
objects to push the lockbuttons, as this
can damage the product.
Convenient Opening
• Make sure that the door is completely
Easy push/pull handle access
closed when going outside. The
Welcome Function
manufacturer does not assume the
When a user gets close to the door lock,
the authorization standby mode will
※ In order to safely use the product, please read "Safety Precautions".
automatically activate.
※ The features of this product and the contents of the user guide may be changed
Silent-Mode Function
without notice for quality improvement.
When going in or out, the sound of the key
entering and door opening will be suspended. Product Components
Automatic Card Reading Function
When a card touches the reader,
The product components used may vary depending on the installation
the reader will conveniently recognize the card.
environment.
Double Authorization
Requires fingerprint & password combination
Outer Body
to open
Security Assurance Function
BIOMETRICS
When someone is inside the house,
authorization for entry from the outside
will be prohibited.
Built-in Fire Detection
Generates alarm in case of a fire
Security Function
Prevents intrusion from the outside
Key Tag (For B2C Only)
User Manual, Product Warranty
'AA' Batteries (LR6)
Emergency Key (5EA)
www.sds.samsung.com
GC68-02025A ED:04
Menu Table Opening the Door from Outside with a Password
When purchased, the product is set to Multi-leveled Security Code Entry
Mode initially. Please refer to "Multi-leveled Security Code Entry Mode
Initialization
setting" for Common Mode setting.
5S
4560852580 ※ Silent Mode
Before entering the password, press the [
password, then both the sound of the key entering and the door opening
will be suspended. It is a useful function if you do not want to disturb
Registration
neighbors when you go in and out at night.
Changing password
Password
New Password
Fingerprint
Fingerprint
Direct registration of
Card or key tag
Touching [Number
CARD
Pad] will light up
Card or user password
with ID number (01~30) the number pad.
ID Number CARD
- If the security mode is changed as 'common mode', second step will be skipped.
Deletion
3S
Fingerprint Note
Password
Fingerprint
Card or key tag
CARD
Use index number
ID Number Opening the Door from the Outside with
All fingerprint
a Fingerprint
77
All user password/card Open the door from the outside using the fingerprint authentication system.
88
Touch the sensor properly with the fingerprint part of your finger which has
been registered.
1. Pressing [Open Fingerprint
Other function
Cover] Button
Welcome function
1 ON
BIOMETRICS
2 No Alarm ON
3 OFF
Press the [Open Fingerprint
Cover] button and the lid of the
Auto fingerprint
5 ON Fingerprint Reading Panel opens.
8 OFF
Opening the Door from Outside with a Card or Key Tag
Double Authorization
ON
4
The door can be opened from outside using a card or key tag.
Place the registered card or key tag on the card reader.
OFF
6
Placing the Card or Key Tag
Multi-leveled
on the Card Reader
ON
7
BIOMETRICS
OFF
9
Lock time
5 1~9
4
Outer Body Parts
Number Pad
This section contains important information to ensure the user's Touch Number Pad
Unlighted
safety and prevent potential damage to property. Please, read
this section carefully and use the product accordingly.
responsibility for any harm caused
by engagement of the lock on an
improperly closed door.
• Please do not hang on the product or
pull it.
• Be sure to correctly match the poles
(+/-) when installing the batteries. Install
the batteries with the correct poles (+/-).
Silent Mode Switch
• Replace all batteries immediately after
they run out of power, and never mix
new batteries with used ones.
• Do not use water, benzene or alcohol
when cleaning the product, as these
fluids can cause product malfunction.
• Replace the batteries within 1 week
after the battery replacement alarm
sounds.
Inner Body Parts
Battery Cover
Inner Body
Mortise Strike Registration Button
(SHS-AML320)
CLOSE Button
Strike
Or
(For B2C Only) Strike box
Mortise
Mortise Strike Strike
(SHS-AML220) box
Handle Shaft Spring
Handle Shaft , Installation Screws
Installation Manual(For B2C Only)
2
SHS-AML320
Opening the Door from the Inside
Opening by Pulling the Inner Handle
 ] button and enter the
Closing the Door from the Inside
Automatic The door is automatically locked 1 seconds after the door is
Success:
DING DONG DENG Locking Setting closed.
Fail:
DING DONG DING Manual
DONG
Locking Setting
When two arbitrary buttons When the numbers on the
are lighted, press the buttons number pad are lighted, enter
● To check if the door is locked from the inside, press the security button
in order. the password and press the []
briefly; the red LED will flash if the door is locked and the blue LED will blink
button.
Note
if the door is unlocked.
Initialization (Password, Card, Key Tag)
●
Password must be entered after the light is on, and if does not, touch [Number
Pad] and re-enter.
●
To cancel, press [ ] button and re-enter. All registered data (password, card, key tag) are deleted. After initialization,
●
If the password is wrong 5 times, "peep" warning alarm will sound 20 times the password is set to '1234', and the registered card, key tag data are
and the system will shut-down for about 3 minutes. When malfunction erased. Please register a new password after initialization.
happens, "beep" will sound every 10 seconds, and stop mode will be turned off
1. Pressing the [Register]
automatically after 3 minutes with multiple 'beeps'.
Button (from the inside)
DING DONG
DING DING
DING DING
DING DING
Press and hold the [Register]
button for 5 seconds.
2. Reading Fingerprint
Password Change
Success:
DING DONG DENG
The password can be 4~12 digits number. Only one password can be
Fail:
registered.
DING DONG DING DONG
1. Pressing the [Register] Button
Touch the Fingerprint Reading Panel
(from the inside)
with the registered fingerprint after
LED light turns on, the lid of the panel
closes in approximately a second
DINGDONG
later. Then push the door handle to
open the door.
Press the [Register] button
briefly.
3. Entering a New Password
(from the outside)
Place the card or key tag on
DING DONG
the card reader.
Success:
DENG
DING DONG DENG The door will be opened after
Fail: Enter the new password (4 to 12
1 second.
DING DONG DING
digits) and press the [ ] button.

5
DONG
●
Manage your password with care so that unauthorized people will not have
access to it. Regularly changing your password can reduce the risk of it
Warning
Number Pad Lighted being leaked.
Fingerprint, Card and Key Tag Registration
Fingerprint
Reading Panel
BIOMETRICS
Open Fingerprint You can register and use up to 100 fingerprints.
Cover Button
Up to 30 cards, including the key tag and user password, can be registered.
Card Reader
1. Pressing the [Register]
Button (from the inside)
Proximity Sensor
BIOMETRICS
DINGDONG
Number Pad
Entry Complete/
Away Security
Setup
Button Open the battery cover of the
Emergency Alert
inner body and briefly press
Light
Battery
the [Register] button.
Replacement Double Lock Light
Time Alert External Power
Contact Part
[Fingerprint Registration]
Reset Switch
3. Reading the Fingerprint to Be Registered
Emergency
Keyhole
Success:
DING DONG DENG
DING
Fail:
DING DONG DING
DONG
The Battery Cover Release When LED light on the Fingerprint Reading Panel is on,
touch the panel with the fingerprint to be registered.
Button
When a "ding" sound is heard and LED light goes off,
(After pressing the battery cover
release button, pull towards the then remove the finger. (Must do it 3 times)
front, and then the battery cover
will open.)
5. Registration Confirmation
1.5V AA Batteries
Success:
DING DONG DENG
BIOMETRICS
Fail:
DING DONG DING
DONG
Sound Control Switch
[Card and Key Tag Registration Without ID number]
Built-in Wireless Module
(Optional)
3. Placing the Card or Key Tag
Auto/Manual on the Card Reader (from the
Locking Switch
outside)
DING DONG
DENG
Place the card or key tag to be registered
on the card reader of the outer body. You
will know the card or key tag has been
registered when "DING DONG DENG"
sounds.
Deadbolt
●
To register multiple cards or key tags, lightly place another card or key
Latch bolt
tag to the card reader within 20 seconds after registering the previous
Open-door sensor card or key tag.
Warning
●
ID number is given automatically in order of the registration.
3
SHS-AML220
Security Assurance Mode Activation/Deactivation
At-home security mode is to prevent opening of the door from outside while
someone is inside.
Security Assurance Mode
●
Please be careful not to trap
Activation
your hand during use.
Warning
DING DONG
DENG
While the door is locked, press
[Security Assurance] button on
the inner body part for 3 seconds.
The door is locked when the
Security Assurance Mode Operation
[Close] button is pressed.
Or
●
When the security assurance function is activated, the door cannot be
unlocked from the outside, so please be careful. Be especially careful not
2. Entering the Numbers for Warning to allow children to set this mode accidently from the inside.
Initialization (from the outside)
Sound Setting and Releasing
- Success: DING DONG DENG
- Fail: DING DONG DING DONG The sound that is generated when the number buttons are pressed, when the
door is locked or when the locked door is unlocked, can be set according to
When the number pad is lighted, enter
the user's preference. The product is set to generate all sounds at the factory.
'4560852580' and then press the [ ]

button.
Open the
battery cover
on the inner
body.
2. Entering the Current Password
(from the outside)
[0] : Mute [1] : Normal [2] : Loud
DING DONG
Door Lock Time Setup Function
DENG, DING DING
Enter the current password when the
This function sets the time interval between the moment the door open/
number pad is lighted, and press the
closed sensor recognizes the door as closed and the moment deadbolt locks
[ ] button.

the door. It can be prevented the deadbolt jam problem by adjusting the time.
4. Checking New Password
Operation (from the outside)
To make sure the
DING
password has been
DONG
properly registered,
check the new Press [Registration] button
password and close briefly.
the door.
6
[Card and user password registration with ID number]
3. Enter 2 digits ID number 4. Enter new user password
DING DING
Input ID between 01 and 30, and Enter new user password(4 to 12
press [ ]. digits) and press [

2. Entering the Current Password
4. Placing the Card or Key Tag 5. Confirming Card or Key Tag
(from the outside)
on the Card Reader (from the Registration (from the outside)
outside)
DING DONG
DING DONG
DENG
DENG, DING DING
Place the card or key tag to be registered Place the registered card or key
Enter the current password ('1234' after
on the card reader of the outer body. You tag to the card reader on the outer
initialization) when the number pad is
will know the card or key tag has been body.
lighted, and press the [ ] button.

registered when "DING DONG DENG"
sounds.
4. Exiting Fingerprint
●
User password is only for the user, so other functions such as registering
Registration Mode
cards are not available with this password.
Warning ●
One ID has only one password or card.
DING
Deleting Registered Fingerprints & Cards
DONG
DENG
You can delete individual or all registered fingerprints and cards.
To end the registration, please
1. Pressing the [Register] 2. Entering the Current Password
press the [Registration] button
Button (from the inside) (from the outside)
on the inner body.
DING DONG
Press the [Open Fingerprint
DING DING
Cover] button on the outer
body to open the lid of the
Press the [Registration] Enter the current password when the
Fingerprint Reading Panel
button for 3 seconds. number pad is lighted, and press [
and touch the panel with the
button.
registered fingerprint.
[Deleting Fingerprints]
3. Reading the Fingerprint to Be Deleted
4. Confirming Card or Key Tag
Success:
Registration (from the outside)
DING
DING DONG DENG
Fail:
DING DONG DING
DONG
When LED light on the Fingerprint Reading Panel is on,
touch the panel with the fingerprint to be deleted.
Place the registered card or key [Deleting Cards] [Deleting ID information]
tag to the card reader on the outer
3. Reading the card to be deleted 3. Enter ID number to delete
body.
DING DONG
DENG
If you want to delete all fingerprints press Enter 2 digits ID number, then the
[77]+[ ] after step2. If you want to delete all card or user password of it will be

7
cards data, press [88] + [ ] after step 2. deleted.

Welcome Function On/Off
The welcome function is a convenient function that automatically activates the
authorization standby mode when a user approaches the door, even before
touching the number pad.
Security Assurance Mode
Deactivation
DING
DING DONG
DONG
DENG DONG
Open the battery cover
Code
and press [Registration]
[1]+[]
button briefly.
[2]+[]
Pull the inner body
[3]+[]
handle to open the door,
[5]+[ ] : Set up fingerprint Authentication standby mode
and it will deactivate. 
[8]+[ ] : Clear Fingerprint Authentication standby mode

On and Off / Function Description
- Welcome function : The mode will automatically activate the authorization standby
Rapid beeping
mode when a user approaches the door lock.
- One-minute alarm : When someone remains in frontof the door lock for more than a
Inside: Press the [Security Assurance] button,
minute, this mode will sound the tamper prevention alarm.
then the sound for action-unavailable
willbe heard.
● The factory defaults are set with the welcome function on and the alarm function off.
● The working distance of the infrared sensor can differ depending on light conditions
Outside: Press the [Number Pad] or touch with
and other environments. When the front door is exposed to sun light or constant bright
a card, then the sound for action-
Caution
lights it is advised to limit the usage of the sensor as it might sound the alarm.
unavailable will be heard.
Intrusion Detection Function
This function generates the alarm sound when an attempt is made to forcefully open
the door from the inside or the outside.
(This is a basic function of the lock, and cannot be separately set or released.)
If the door is forcefully opened while locked, the door opening sensor detects it and
generates the alarm sound.
Automatic/Manual Locking Setting
The Automatic Locking mode allows for automatic locking of the door when
it is closed.
Open the
battery cover
on the inner
Put the [Sound Control]
body.
switch on one of [0],
[1], or [2], and close the - Automatic: The door is automatically locked 1 seconds after being closed.
- Manual: The door does not lock automatically, and [CLOSE] button must be
battery cover.
pressed from the inside, touch [Number Pad] to close the door.
Replacing the Batteries
Battery Replacement Alarm Generation
If the melody of "Blues for Elise" sounds when opening the door with the
password or fingerprint or a card (key tag), it is time to replace the batteries.
(The low battery indicator is lighted when the melody sounds.)
Replacing the Battery
Replace all 8 batteries within a 1 week of the first alarm sound.
- The unit will stop operating suddenly if the batteries are not replaced.
●
Depending on battery manufacturer, date of manufacture and the user environment,
Default: 1 second
the duration of use may vary.
[51] : 1 second
(In the case of average use, given as 10 times a day, 8 AA alkaline 1.5V batteries can
Warning last for 12 months.)
[59] : 9 second ●
If the poles of the batteries are not placed properly, the lock will not operate normally.
●
Liquid leaks from batteries can damage the product. Check the batteries regularly
Press [51] ~ [59] button, and then (every 6 months).
●
After the battery replacement alarm has sounded, password/fingerprint/card
press [] button.
information cannot be registered, changed, deleted, initialized or configured until the
batteries are replaced.
10
Multi-leveled Security Code Entry Mode Setting
You can set the security mode suitable for your use when you open the door
using a password.
DING DONG DENG
DING DONG
DENG
DING
[7] Button : Multi-leveled
DONG
Security Code Entry
].

Mode
[9] Button : Common Mode
Briefly press the [Register] Press the [] button after pressing the
button on the inner body. [7] or [9] button, and the security mode
will be set.
Double Authorization Mode Setting
The Double Authorization mode is an enhanced security function with two
factor authentication in which both password and fingerprint are required
when opening the door. To set up the Double Authorization mode, at least
one fingerprint has to have already been registered.
DING
[4] Button : Double
DONG
authorization mode on
[6] Button : Double
authorization mode off
Briefly press the [Register] Press the [] button after pressing the
button on the inner body. [4] or [6] button, and the authorization
mode will be set.
Two-factor Authentication
Mode Operation
Success:
DING DONG DENG
Fail: DING DONG
DING DONG
DING DONG
DENG, DING DING
Touching Enter the password when Touch a registered fingerprint
[Number the number pad is lighted, on the Fingerprint Reading
]

and press the [] button. Panel. After a successful
Pad].
authentication, the door opens.
4. Exiting Fingerprint Setting the Security Function
Deletion Mode
This is a function to prevent any intrusion while you are out. Should the door
DING
be opened from the inside while the intrusion prevention function is on, the
DONG
emergency alert light will flash and the alarm will make "beep beep beep~"
DENG
sound.
To end the deletion mode,
Registration
press [ ] button. Setting the Security Function Releasing the Security Function
DING DONG
DENG
Or
DING DONG
After touching the Number Pad,
DENG 1. When the door is closed [ ] of the
outside body's number pad will light up. have a registered fingerprint read, or
contact a registered card, or enter the
2. Press and hold the [ ] button on the
password and then press the
outer body for 3 seconds while the door
[ ] button.
8 
is locked.
Using the Emergency Battery
If the batteries are not replaced after their replacement time comes, they will
be completely discharged and the lock will not operate.
Opening the Door Using an Emergency Battery
Purchase an emergency battery (9V) at the nearest store.
DING DONG
- As the alkaline batteries offer longer life, they are recommended over
DENG
the manganese batteries or rechargeable ones.
Welcome One-minute alarm While connecting a 9V
ON ON battery to the contact
ON OFF point, it is available to
Or
OFF OFF
use fingerprint, card and
password.
Alarm Sound (Prank Prevention Function)
This function generates an alarm sound and deactivates lock operation when
it is improperly handled from the outside.
This alarm will sound if an attempt is made to open the door with an invalid card, or if a
wrong password is entered five times in a row.
The alarm sound is generated, and the lock is deactivated for 3 minutes. While the door
is in this inactive mode, a single "DING" sound is generated every 10 seconds and seven
consecutive "DINGS" will sound after 3 minutes. Following this, the lock is released from
inactive mode.)
Releasing the Alarm
Inside Press the [Register] button.
Outside Get a registered fingerprint or a registered card authorized or enter
the password and then press the [ ] button.

Built-in Fire Detection Function
This function generates the alarm sound when fire is detected so that the
residence can quickly respond. The built-in fire detection function is a basic
function of the lock, and cannot be released by the user.
Set the [Automatic/Manual Fire detection function is operational at about 75 ℃ ± 10 ℃; this can vary
Locking] toggle switch of depending on the installation environment.
the Inner Body to the 'A'/'M'
When fire occurs, the temperature sensor detects it and flashes the [Close] button
position.
while generating the alarm sound. The door is automatically opened after the alarm
sound has stopped. (The lock resumes normal operation if the inside temperature
returns to a normal level.) The built-in fire detection function is activated when the
temperature rises around 60°C, which may differ depending on the installation
environment.
Product Specifications
Item Specifications
Voltage AA Alkaline 1.5 Batteries (LR6) 4EA or 8EA (6V)
Emergency Power
9V Battery (6LF22) (Separately sold)
Source
Electronic Control Method (Password entry or fingerprint or card
Operation Method
or key tag reading)
Weight 3.9 kg (including both inner and outer bodies)
Outer Body
85mm(W) × 387mm(H) × 61mm(D)
(including the handle)
Product
Dimensions
Inner Body
86mm(W) × 354.8mm(H) × 63 mm(D)
(including the handle)
● The contents of this user guide are subject to change without prior notice to
11
the user in order to enhance performance of the product.
DING DONG
DENG
Success:
DING DONG DENG
Fail: DING DONG
DING DONG
9
12