Sanyo MCD-Z250F Instruction Manual page 11

RECORDING
WARNING
UNAUTHORIZED
RECORDING OF
COPYRIGHTED MATERIAL MAY VIOLATE
APPLICABLE COPYRIGHT LAWS. SANYO
ASSUMES NO RESPONSIBILITY FOR
UNAUTHORIZED DUPLICATION, USE OR
OTHER ACTS WHICH INFRINGE UPON THE
RIGHTS OF COPYRIGHT OWNERS.
PREVENTION OF ACCIDENTAL ERASURE
Accidental erasure of important recordings can be
prevented by breaking out the labs at the back of
the cassette tape, (Fig, 10)
Break out tab A for side 1
or side A.
Break out tab B
for side 2 or side B.
If a tab has been broken OUI in error and the tape
is to be used for another recording, simply adhere
some cellophane tape over the tab hole and the
tape can be rerecorded.
~
Automatic level control (ALC) recording
The ALC circuit adjusts the recording input
level aulomallcally. No adjustments are
Pre~aration
Pre&s [STOP/EJECT] and insert a blank cassette
into the cassette holder.
A) Recording from a compact disc
r
This recording system starts disc play and
cassette recording at Ihe same time.
Recording from Track Number 1
1.
2.
3.
4.
Set [F~NCllON] to CD.
Load Ihe disc. See "LOADING A DISC".
Press [REC]. IPLAY] will lock down al the
same time. CD recording starts.
Press K3TOP/EJECTl to stop recording at
any time. When the end of Ihe tape is
reached, the disc play and tape recording
will automatically stop at the same time.
Recording programmed tracks
1. Program the material in advance. See
"PROGRAMMED PLAY".
2. Press [REC]. [PLAY] will lock down at the
same time. CD recording starts from the
first programmed track.
Recording from playing track
When you want to record music as you listen,
press [REC]. Recording automatically starts
from the beginning of the track.
.,,.
,,
10