TURNING TO FM STEREO STATIONS
To receive an FM stereo broadcast, make sure that
“MONO
is not displayed.
If “MONO
appears,
press [REPEAT/FM
MODE] to turn “MONO
off.
“ST” appears when an FM stereo broadcast
is
received.
If the signal from an FM stereo station is weak and
reception is poor, press [REPEAT/FM
MODE] to
change to monaural reception. “MONO
appears.
The sound will be monaural.
PROGRAMMED
TUNING
If a station frequency is stored in the memory, it can
gafiily be recal19dusing [P,SGANI,
Up106
Wi!hng each
can be programmed
in Ihe
FM and AM bands.
Programming
stations
1,
Tune in the station to be preset as described in
“UP/DOWN
TUNING”.
2.
Press [MEMORY].
“PRG” blinks,
&
While “PFIG” is blinking,
prcr.m [P, SGAN] 10
selecl the
channel number (1 -6) to be preset.
4.
While “PRG” is blinking, press [MEMORY].
5.
Repeat
the
steps
above
to add
more
programming
stations.
NOTE:
Whenever
a new station is programmed,
Ihe
previous programming
will be
canceled.
TUNfNG INTO PROGRAMMED
STATIONS
Preset scan tuning
1,
Press [BAND] to select the desired band.
2,
Press and hold down
[PSCAN]
for at least 1
second. “PS’ blinks.
The programmed
stations
are tuned
in to
successively
for about 5 seconds each.
3.
If [P. SCAN] is pressed within about 5 seconds
when a desired station has been tuned in to,
that station will stay tuned in to.
Alternate
tuning
method
1.
Press [BAND] to select the desired band.
2.
Press [P. SCAN] to display the number of the
preset of your choice.
Tap [P. SCAN] lightly.