ASSEMBLY
Tongue
During shipping tongue may be tilted back toward unit.
Roll tongue down into working position. Pin jackstand to
tongue. Figure AsmP-R-0525
LEVEL RODS
Pin the leveling rod assembly to the tongue using pin, flatwasher and cotter pins shipped with assembly. The
end with the jamnut should be attached to the tongue (Position for greasing). It may be necessary to raise the
tongue slightly for the attachment of the leveling rod. Connect the opposite end to the center axle weldment
using the pin and cotter pins shipped in the leveling rod assembly.
Connection at Tongue
Connection at Axle
1812 08/14
Assembly Section 3-3
© 2012 Alamo Group Inc.