Front Panel - RCA VR708HF User Manual

Other Information
TV•VCR STOP•EJECT RECORD
POWER
TAPE SPEED
VIDEO VIDEO
REV FWD
INPUT LEFTMONO RIGHT CHANNEL
TRACKING
INPUT

Front Panel

AUDIO (LEFT/MONO and RIGHT) and VIDEO Input Jacks Receives signals from another
component (like another VCR or camcorder) when connected to the VCR using A/V jacks. Use the
INPUT button to select L2 to record from these jacks (L1 indicates the rear panel A/V jacks being
active).
CHANNEL TRACKING Up and Down Adjusts the image quality by removing picture "noise"
and distortion.
FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback.
Starts slow motion during play-pause and increases slow-motion speed.
PLAY•PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to
prevent recording of unwanted scenes.
POWER Turns the VCR on or off.
RECORD Starts VCR recording. Also used for Express Recording (XPR).
REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during
playback. Starts slow motion during play-pause and decreases slow-motion speed.
STOP/EJECT A single press of this button stops normal VCR functions such as record, playback,
rewind, fast-forward, or pause. If pressed a second time, this button ejects an inserted tape.
TV•VCR Switches the picture signal so that it either comes from the VCR or the TV cable/
antenna signal.
54 Chapter 5