Advertisement
4
English
Installation
If the mounting surface is less than 1⅜", install the
faucet with the gray plastic spacer, fiber washer,
metal washer and mounting nut.
If the mounting surface is greater than 1⅜", install
the faucet without the spacer.
If the mounting surface is greater than ⅜", install the
shaft extension.
Install the longer screws on the mounting nut.
Connect the hot and cold supply hoses to the stops.
Use two wrenches, as shown in the
illustration, to prevent hose twisting.
Tighten wrench tight.
Advertisement
