Front Panel - RCA VR646HF User Manual

Appendix: reference

Front Panel

AUDIO (LEFT MONO and RIGHT) and VIDEO INPUT Jacks Receives signals from
another component, like a VCR or camcorder, when it is connected to these jacks. Use
INPUT on the remote to select L2 to record from these jacks.
CHANNEL TRACKING Up or Down Selects next higher or lower channel in the VCR's
channel memory. Adjusts tracking when a tape is playing. Press both together to recenter
tracking.
FWD Forwards the tape when the VCR is stopped. Searches the picture forward during
playback. Starts slow motion during play-pause and increases slow-motion speed.
PLAY PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording
to prevent recording of unwanted scenes.
POWER Turns the VCR on or off.
RECORD Starts VCR recording. Used for express recording.
Remote Sensor Receives signals from the remote control. Aim the remote at this
sensor.
REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during
playback. Starts slow motion during play-pause and decreases slow-motion speed.
TAPE SPEED Selects a recording speed (either SP or SLP).
STOP•EJECT Stops the normal functions such as record, playback, rewind, fast-forward,
or pause. Ejects the tape when the VCR is stopped.
TV•VCR Switches the picture signal so that it either comes from the VCR or the cable/
antenna system.
58
POWER TV¥VCR
CHANNEL
VIDEO AUDIO
INPUT LEFT MONO RIGHT
TRACKING
REV FWD
RECORD
TAPE SPEED STOP¥EJECT
Remote Sensor