Table of Contents
Advertisement
Important Remarks:
(1)Analog Reception and DVB-T Reception
When you wish to watch TV using your TV tuner (analog tuner) and that your DVB-T
unit has been turned off or unplugged, the image quality can be deteriorated according
to the TV you are using. This is normal, your DVB T unit must be set in standby mode to
allow a good quality signal.
(2)Problems receiving DVB-T channels
- First check that you have well connected your home antenna with the DVB-T unit.
- Start a new automatic channel search as follows:
5.
Press the MENU key from the remote control
6.
Select Channel Search
7.
Then select Auto Search
8.
Then press OK or Right button to run the automatic channels search.
Channels scanning may take a few minutes to complete.
(3)Display problem in HDMI mode – If you have selected a HDMI resolution which is
not supported by your TV (for example, you have selected 1080i while your TV supports
720p resolution only), a black screen will appear. In that case, you just need to press
the HDMI key repeatedly until the program appears on the screen.
Remark :
-
The default HDMI resolution is 720P.
-
HDMI resolution can not be changed during USB media playback.
-
HDMI resolution can not be changed during recording or Timeshift mode.
(4) If the reception problem still occurs.
Your unit has been tested for optimal performance over all the country. In most cases,
the DVB-T reception problems are due to a weakness in your home's antenna
installation. If your installation is old, or has never been tested for DVB-T, the signal can
be too weak or flawed for the unit to work properly. I t is therefore highly recommended
that you ask for a qualified technician to test the compliance of your home antenna.
This unit has been designed and is guaranteed to work with a signal of at least 60dB.
28
Advertisement
Table of Contents
