Remote Control - SchaubLorenz TNT-2722MPEG4 User Manual

Remote Control

1. STANDBY: Switch the receiver in and
out of standby mode.
2. Numeric Buttons: Select channel
3. MENU: Display the main menu on the
screen, or return to the previous menu
or status.
4. TEXT: Show teletext information of
current channel.
5. CH:Navigates
Menus.Skip to previous channel.
6. VOL:Navigates through the Menus.
decrease volume.
7. OK: Display channel list on screen.
Confirm selection.
8. SUB-T: Selects Subtitles Language.
9. REC: Make a real-time recording.
10. TIMER: enter the setup menu of time
recorder.
11. PREV: Play previous USB media.
12. F.REW: Speed down while USB Media
playing.
13. VIEW REC: To access the list of your
recordings.
14. USB: Allows you to display all
multimedia content of the USB key
inserted in the device.
15. PLAY/PAUSE: Used to pause or
playback the program being viewed.
HDMI: change the HDMI resolution.
16. STOP: Stop playing, recording or Timeshift.
17. F.FWD: Speed up while USB Media playing.
18. NEXT: Play next USB Media.
19. TIMESHIFT: Press the TIMESHIFT button when you want to pause, Press the button
again to resume playback of the TV program.
20. INFO: Displays signal strength and quality.
21. AUDIO: Selects an Audio Language.
22. CH: Navigate through the Menus. Select the next channel.
23. VOL: Navigates through the Menus. Increase volume.
24. EXIT: Exit the current Menu or returns to the previous Menu.
25. LAST: Back to previous channel.
26. MUTE: Mute or Restore Audio Output.
through the
12