Table of Contents
Advertisement
Multimedia Functions
1) MULTIMEDIA PLAYBACK
Connecting a USB device
1.
Power-on the unit.
2.
Plug a USB stick into the USB port of the receiver.
3.
Wait three seconds so that the receiver can read and identify the stick.
4.
Press USB button to play on your TV / photo / audio and video contents from your
USB device.
Press the LEFT/RIGHT button to select Music, Photo, Movie or PVR, which allows you
to watch the recordings made on this unit.
Notes on video playback via USB port
-
After connecting your USB device to the unit, you may need to turn the device
on before it can be detected.
-
This unit does not support direct USB connection with computer. It is necessary
for you to transfer your data/files on a USB stick or MP3 player.
-
If you are using an external hard drive to be connected via USB, you must
connect the hard drive simultaneously with a power source and with the unit. If
you are using a portable video player with hard drive, you must make sure
that the internal battery is fully charged.
-
Verify that the file system of your USB device is properly formatted in FAT 32.
USB media formatted in NTFS is not compatible with this unit. If your USB drive
formatted in FAT 32 is not recognized by this receiver, it is recommended as a
last resort that you format your hard drive on this unit. Before doing so, please
refer to the manual of your USB device to ensure that formatting is possible
without altering its functionality.
-
The USB device used may not be fully compatible with USB 2.0. In this case, try
a different USB stick in order to identify the problem.
-
The loading time of video files depends on the disk space occupation and may
take up to one minute. Please do not remove your USB device during video
playback or loading.
Important remarks about reading MPEG-4 videos on this unit
If you encounter any problems when playing MPEG4 videos, please check the
below points:
1） There is a wide variety of codecs and compression methods in use. It is
possible that some videos, including those downloaded from unofficial websites,
are not fully compatible with this unit.
2） Videos must be encoded with a soundtrack in MP3 format, since other formats,
such as DTS, DTS HD, DD+, are not supported. If there is no sound, it means that
the audio codec is not compatible.
Multimedia Playback
Music
Photo
S e l e c t
EXIT E X I T
21
Movie
PVR
M o v e
Advertisement
Table of Contents
