Summary of Contents for SchaubLorenz TNT-2722MPEG4
Page 1
USER MANUAL OF DIGITAL SET TOP BOX TNT-2722MPEG4 Please read and keep these instructions For instruction manual in another language, check online at http://manuel-utilisateur.logisav.fr...
Page 2
Important safety instructions – please read carefully and keep for future reference To reduce the risk of fire or electric shock, do not expose this product to water, rain or moisture. To prevent the risk of electric shock, do not remove the cover or back of this product.
Page 3
This product is compliant with directives 2006/95/CE (abrogating the directive 73/23/CEE modified directive 93/68/CEE) 2004/108/CE (abrogating the directive 89/336CEE). - This logo set on the product means that the recycling of this apparatus comes within the framework of the directive 2002/96/EC of January 27, 2003 concerning the waste on electrical and electronic equipment (WEEE).
Introduction Thank you for choosing this High-Definition DVB-T MPEG4 Receiver. With this HD TV MPEG4 tuner and HDMI connection, you can watch all new digital DVB-T channels in high definition. Thanks to its USB port, this receiver is also a genuine multimedia platform: Insert a USB stick into the USB port and start recording a DVB-T program directly on the USB by simply pressing a single button on the remote control! You can also schedule one or several recordings by pressing the TIMER button on the remote...
Page 6
Package Contents Before installing the product, please check that you have in possession the following. – DVB-T Receiver – Remote Control – User Manual...
Front and Rear Panel 1. Front Panel 1. USB/REC INDICATOR: The indicator is red when in recording or Timeshift mode and it’s in green when USB device is inserted. 2. POWER INDICATOR: The indicator is red when the unit is standby; It is green when the unit is power on or in recording status.
Page 8
Remark: This device can also be held in vertical position. In order to do so, adjust the holder(1) as shown on below illustration.
Quick Installation Guide for First Use (1): Connect your roof antenna to RF IN socket of the unit (The antenna cable is not provided) (2): Connect the unit with your TV. Connect the receiver with a HDMI cable (Cable is not provided). Step 3: Prepare the remote control - Insert two AAA batteries into the remote control.
Page 10
Guide d'install . Franç ais Langue des Menus Pays France Recherche Chaî nes EXIT S O R T I E C o n f i r m e r If the automatic installation message does not appear: – Press the MENU button on the remote control –...
Page 11
Good to know-Main functions of your Remote Control Menu Navigation – Use the Menu button to change the unit’s configuration. – To exit a menu or a sub-menu, press the Exit button on the remote control to return to the previous screen. Audio Language Selection –...
Remote Control 1. STANDBY: Switch the receiver in and out of standby mode. 2. Numeric Buttons: Select channel 3. MENU: Display the main menu on the screen, or return to the previous menu or status. 4. TEXT: Show teletext information of current channel.
Page 13
Using the Remote Control -Insert two AAA batteries into the remote control. Make sure to respect the polarity signs + / - (batteries are not included). Note: 1. Do not mix batteries of different type. 2. Do not mix old and new batteries. 3.
Connections This section provides installation steps of your receiver. Refer to the manual supplied with the equipment for the installation of outdoor equipment such as the Terrestrial antenna. When connecting new equipment, be sure to refer to the related parts of the manual. Also, make sure you disconnect all the equipments from the mains supply before the connection.
Basic Operation (1) Program Press MENU button and select [Program]. The Menu provides options to adjust the Program Manage Settings. Select an option by press UP/DOWN buttons and press OK or RIGHT buttons to adjust that setting. Press the EXIT button to exit the Menu. Program Program Edit S o r t...
Page 16
ID)/By service name/By service ID. c. LCN (Logical channel number) Please keep the LCN (Logical Channel Number) option ON (activated), so that the channels can be classified in the correct order defined in your country. (2) Video Settings Press MENU then select [Picture]. The Menu provides options to adjust the video settings. Press UP/DOWN to select an option and press RIGHT/LEFT to adjust that setting.
Channel Search A u t o S e a r c h M a n u a l S e a r c h C o u n t r y F r a n c e A n t e n n a P o w e r O f f Auto Search Auto search is a kind of intelligent and convenient mode of programs searching, which...
Page 18
Manual Search Channel No . Frequency: 474000 B a n d w i d t h : Quality EXIT E X I T C o n f i r m Country Make sure to select the correct country to make the installation successful. Antenna power Enable Antenna Power if an external active antenna is connected.
Page 19
Option O S D L a n g u a g e English S u b t i t l e L a n g u a g e English A u d i o L a n g u a g e English EXIT R e t u r n C o n f i r m...
Page 20
Factory Default Reset your receiver to the Default Factory Settings. Select [Factory Default] and press OK or RIGHT to select. Enter your password or the default password '000000' and press OK to confirm. This option will delete all preset channels and settings. Information View hardware and software information of the receiver.
Multimedia Functions 1) MULTIMEDIA PLAYBACK Connecting a USB device Power-on the unit. Plug a USB stick into the USB port of the receiver. Wait three seconds so that the receiver can read and identify the stick. Press USB button to play on your TV / photo / audio and video contents from your USB device.
Page 22
file does not appear on the unit’s screen, check that the file multimedia 3) If your name ends with the extension “.AVI, MKV, FLV, JPG, MP3”. 4) This device can read most videos in the market. However, proprietary formats such as DIVX, WMV, RM, RMVB, M4V, ISO and IFO will not be read. If this situation arises you are advise to convert the video into a standard MPEG4 format.
Page 23
3.1.1 Recording a program by using a USB This receiver allows you to record your favorite DVB-T programs in a simple and friendly way. You just need a USB key and insert it into the unit. The recording will be made on the key and you can view the recordings later from this receiver or any other compatible multimedia devices.
Page 24
Notes: – Do not remove your USB stick while playback is in progress; otherwise the content of your USB drive could be damaged. Press the STOP button to stop playback and then remove your USB stick. 3.4 Making one or more scheduled recordings (TIMER FUNCTION) Press the TIMER button to enter the scheduled recording mode.
Page 25
– When entering the scheduled recording menu (by pressing the TIMER key of the remote control) and setting an immediate recording (scheduled to start in less than 5 minutes), do not put the unit into standby mode afterwards (by pressing standby key), or the recording may be cancelled. –...
Page 26
Time Shift Function This DVB-T receiver presents a function called “Time Shift” which allows recording of TV program onto a digital storage medium (e.g. USB stick or external hard disc, not supplied). You may then watch the program at a later time that is more convenient to you.
Troubleshooting If you experience problems with this receiver or its installation, in the first instance, please read carefully the relevant sections of this User Manual and this Troubleshooting section. Problem Potential Reasons What to do Standby light not lit Mains lead unplugged Check mains lead Mains fuse blown Check fuse...
Page 28
Important Remarks: (1)Analog Reception and DVB-T Reception When you wish to watch TV using your TV tuner (analog tuner) and that your DVB-T unit has been turned off or unplugged, the image quality can be deteriorated according to the TV you are using. This is normal, your DVB T unit must be set in standby mode to allow a good quality signal.