Table of Contents
Advertisement
1. Introduction
About this Manual
Intended Use The intended use of this product is to manage the list of
About
Flowtron
Hydroven 3
This manual is your introduction to the
system.
Hydroven 3
You must read and fully understand this manual before
using the system.
Use this manual to initially set up the system, and keep
it as a reference for day-to-day routines and as a guide to
maintenance.
If you have any difficulties in setting-up or using the
Flowtron Hydroven 3
ArjoHuntleigh sales office, listed at the end of this
manual.
clinical conditions detailed in the "Indications" (refer to
page 2).
The
Flowtron Hydroven 3
of a prescribed plan of care detailed in the "Indications"
(refer to page 2).
The pump supplies air via connecting tubes to an
inflatable garment allowing the application of controlled
pressure to gently compress the limb. This action assists
in increasing the return of blood, excess fluids, improves
venous stasis and encourages the reabsorption of waste
products.
The pump operates on an automatically timed cycle of
3 minutes, 90 seconds inflation followed by 90 seconds
deflation. Variable pressure output ranges from
30-100 mmHg. The garments are inflated alternately.
The
Flowtron Hydroven 3
garments:
•
garments have a single chamber and
Hydroven 1
provide uniform compression.
•
garments have three chambers providing
Hydroven 3
graduated segmental compression, inflating distally
to proximally.
Optional garment inserts can be used to increase the
circumference of the standard arm and leg garments.
A full technical description of the
ystem can be found in the Service Manual, part No.
s
SER0014, available from your local ArjoHuntleigh
sales office.
1
Flowtron
system, contact your local
system should be used as part
system operates two types of
Flowtron Hydroven 3
®
Hide quick links:
Advertisement
Table of Contents
