Garment And Insert Information; Garment Description; Selecting The Correct Garment - Arjohuntleigh FLOWTRON HYDROVEN 3 Instructions For Use Manual

4. Garment and Insert Information

Garment Description

Zip Ring Pull
Tubing Connector
(To Pump)
Hydroven 3 Garment

For Hydroven 1 garments, when an insert is not in use, the bung can be used
as a quick air release.

Selecting the correct Garment

Knee
Circumference
Half Leg Garment
Quick Air
Release Bung
Garment
Bung/Connector
For Insert Tubing
1. Select the type of garment depending on treatment
type:
•
Hydroven 1
provide uniform compression.
•
Hydroven 3
providing graduated segmental compression,
inflating distally to proximally.
2. Measure the circumference of the largest part of the
limb, and the length in cm/inch from the heel to the
upper thigh for a full leg garment, heel to knee for
half leg garment, from shoulder to finger tips for
full arm garment, and from elbow to finger tips for
half arm garment. Refer to "Accessories" on
page 14 to order the correct size garment.
Shoulder Circumference
5
Zip Ring Pull
Tubing Connector
(To Pump)
Hydroven 1 Garment
garments have a single chamber and
garments have three chambers
Full Arm Garment
Garment
Bung/Connector
For Insert Tubing
Hand Circumference