Table of Contents
Advertisement
Using Your TV and Remote
With VCRs: Setting the VCR 1 Channel
The VCR 1 Channel works with VCR1 button on the remote. If the VCR 1
Channel is set, pressing VCR1 selects the channel to see the VCR picture.
The VCR 1 Channel setting depends on which diagram you have used
from the Connection Guide. If you want to turn this feature off, set the
VCR 1 Channel to Disable. Refer to the chart below for your setting.
1.
Select the Setup Menu
2.
Highlight VCR1 Channel
3.
Enter channel number
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 03
Controls Alarm Adjust Setup
English Français Português
Autoprogram
Label: 13
Channel Memory: 13 Stored
Cable/Air: Cable
VCR 1 Channel: 00
Diagram used from the
Connection Guide:
1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C
13
Clear
13
Clear
13
Clear
Set VCR 1 Channel to:
00
4B, 5B
3 or 4 (same as 3/4 switch)
A. Press TV to set the remote to
control the TV.
B. Press MENU•PROG to select
the Setup menu. This menu
is white.
A. Press MOVE
to highlight the
VCR 1 Channel.
B. Press MOVE
to highlight the
channel.
A. Enter channel 00, 03, or 04.
Choose your setting from the
chart below. Press CHANNEL
down until "Disabled" is
displayed to turn the feature off.
9
Advertisement
Table of Contents
