Using The Input Button; Using The Remote Control; Programming The Remote To Operate Other; Components - RCA TruFlat 24F610TD User Manual

Using the Remote Control

PRESETS In TV mode, picture options are reset to original factory settings.
RECORD In VCR mode, press to program your VCR to record a program.
REVERSE In DVD mode, press REVERSE to go backwards on a disc.
SEARCH In VCR mode, accesses Index Search feature.
SKIP Press once before changing channels and the TV will wait 30 seconds before
returning to the original channel. Press repeatedly to add more time. In DVD mode,
displays the Info Display with the Angle icon highlighted.
SPEED In VCR mode, selects a recording speed.
STOP In DVD mode, stops playing the disc and displays the DVD's menu system.
TV Turns on the TV and puts the remote in TV mode. Also displays current status.
VCR Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TV
and tune to the correct video input channel.
VOL – or VOL + Decreases or increases the TV's volume.
ZOOM In DVD mode, zooms in on the picture.

Using the INPUT Button

Use the INPUT button to scroll through the available video input channels and view
components you have connected to the TV/DVD.
1. Make sure the component you want to view is turned ON.
2. Press INPUT to tune to an available video input source and view the component.
3. To return to the previous channel, continue pressing INPUT.
DVD
VCR
VCR button
VOL
MUTE GO BACK
CLEAR
CLEAR
PRESETS
button
DISC MENU
CC
1
4
7
INPUT
REVERSE
RECORD
REVERSE
AGAIN
and PLAY
SPEED
buttons
You'll use these buttons when
programming the remote.
10
Graphics contained within this publication are for representation only.
ON OFF
ON•OFF
TV
button
CH
MENU
OK OK
SKIP
INFO
GUIDE
2 3
5 6
8 9
ANTENNA
0
FORWARD
PLAY
STOP PAUSE
ZOOM
OPEN CLOSE
STOP
SEARCH
button

Programming the Remote to Operate Other

Components

The universal remote can be programmed to operate most
brands of remote controllable components. The remote is
already programmed to operate most RCA, GE, and Proscan
components.
Notes: The TV and DVD buttons can't be programmed on this remote.
The remote may not be compatible with all brands and models of
components. It also may not operate all functions of the remote that
came with your component.

Find Out If You Need to Program the Remote

To determine whether the universal remote needs to be
programmed for your component, turn the component ON.
For example, to program the remote for a VCR, turn on the
VCR. Point the remote at the VCR, and press the VCR button.
Then press ON•OFF or CH + (channel up) or CH – (channel
down) to see if the VCR responds to the remote commands. If
the component does not respond, the remote needs to be
programmed.
Chapter 2