Features; Overview; Rfid Swipe Indicator; Qr Code - GE DuraStation Operation And Maintenance

DuraStation™ EV Charger User Manual
Owners should contact 1-888-GE-RESOLVE or DuraStation.support@ge.com for any operational issues with
DuraStation.
Users should contact 1-855-4GE-EVSE for any issues.
The following symbols are used for important safety information in this document:
WARNING: Denotes operating procedures and practices that may result in
personal injury or loss of life if not correctly followed
CAUTION: Denotes operating procedures and practices that, If not strictly
observed, may result in damage to, or destruction of equipment.
NOTE: Notes call attention to information that is especially significant in
understanding and operating the equipment.

3 Features

3.1 Overview

The DuraStation Pedestal is a SAE J1772
current rating. This product will be floor/ground mounted and designed to reside indoors or outdoors (NEMA
type 3R enclosure)

3.1.1 RFID swipe indicator

The RFID swipe indicator is on the top assembly that indicates
where a user should swipe their RFID card.

3.1.2 QR Code

The top assembly of the DuraStation has a ¾" x ¾" Quick Response (QR) code label placed under the
top assembly cover, viewable through the top cover. Each QR code holds a unique serial number in its
image. The QR code serial number is stored in the EVSE's SBC (Single Board Computer).
An EV driver or EVSE owner can use their iPhone and the GE DuraStation application to scan the QR
code. Once the QR code is captured, the application will automatically connect to the GE WattStation
Connect and provide the driver or EVSE owner with access and information for the DuraStation.
Figure 3.3
5
TM compliant Level 2 (208 – 240VAC) EVSE and has a 30A maximum
GE Industrial Solutions ©2014 GE Company All Rights Reserved