Using Program Review - RCA B27TF685 User Manual

16061510-CHAPTER 4 12/13/02 11:48 AM
V C R O

Using Program Review

Program Review allows you to review all of the programmed recordings currently
stored in the VCR's memory and to remove a programmed recording quickly and easily.
1
Press the MENU button.
Press the DOWN arrow
button to select the VCR
Setup icon, then press the
RIGHT arrow button.
2
Press the DOWN arrow
button to select "Record
View", then press the
RIGHT arrow button.
The information for the
first program appears on
the screen.
3
To see the information for the program number, press the RIGHT
arrow button.
4
If you want to remove a program from memory, press the CLEAR
button when the program you want to erase is highlighted. That
program is erased from memory.
Press the MENU button to exit.
Page 63
P E R AT I O N
VCR Setup
Timer Record
Program Review
True Repeat : Off
CH
Block Repeat : 10
Move Sel.
Exit
VCR Setup
Mode CH Start End
Once 7 10:30 am 12:30 pm
---- --- -- : --am -- : --am
---- --- -- : --am -- : --am
CH
---- --- -- : --am -- : --am
---- --- -- : --am -- : --am
---- --- -- : --am -- : --am
SP 10/ 14/ 2002 Mon
Clear : REC Cancel
Move Sel.
Exit
Program Review is only available if
you have programmed your VCR to
record at a later time.
If you're recording through a cable
box, the Program Review screen
displays the output channel of the
cable box as the channel number to be
recorded.
The VCR is equipped with
a program memory backup that saves
all the timer program information if the
power to the VCR is interrupted. If the
unit has been without power, all of the
timer program information will be
disabled, until you reset the clock.
When the clock is reset, the programs
will be restored.
C
63
F : VCR O
HAPTER OUR PERATION