•
The channel might be blank — change channels.
•
If in DVD mode, press TV, then the INPUT button twice for the CABLE or AIR channels.
Sound okay, picture poor
•
Check antenna connections. Make sure all of the cables are firmly connected to the jacks.
•
Try adjusting sharpness function to improve weak signals.
Black box appears on the screen
•
Closed caption might be on.
The Remote Control Doesn't Work
•
Something might be between the remote and the remote sensor on the component. Make sure
there is a clear path.
•
Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the
remote.
•
You might need to reset the remote: remove batteries and press the number 1 button for at
least 60 seconds. Release the 1 button, and replace the batteries.
•
Make sure remote is in the correct mode (TV or DVD).
Problems with V-Chip/Parental Controls
The rating limits don't work
•
For rating limits to take effect, you must lock V-Chip settings to activate them.
I don't remember my password and I want to unlock the TV
•
If you forget your password you can reset it. Enter 5898 as the password and then change it
to a new one.
DVD Problems
Can't advance through a movie
•
You can't advance through the opening credits and warning information that appear at the
beginning of movies because the disc is programmed to prohibit that action.
The invalid icon
•
The feature or action cannot be completed at this time for one of the following reasons:
•
The disc's software restricts it.
•
The disc's software doesn't support that feature (e.g., angles).
•
The feature is not available at the moment.
•
You've requested a title or chapter number that is out of range (doesn't exist).
Other Information
appears on screen
Other Information
Continues on next page...
1