Link-One L1-AW1UHD User Manual page 31

High Power Wireless N150 USB Adapter
a. Click Wireless>Wireless Security;
b. Enable WPS Settings;
c. Select WPS Mode: PIN , enter the PIN code you've noted down from the wireless adapter and click OK (At
this time, the WPS LED on the router will be blinking).
3. Go back to the wireless adapter UI page and click Next;
4. On the appearing page click Start;
5. Then the following dialog box will appear. When it is configured successfully, click Finish.
Method Two: Enter the router's PIN code on the wireless adapter.
31