Sony PCS-1P Connection Sheet page 2

Connection Sheet (ISDN Connection)
System Setup
1
TV monitor** 2
AUDIO OUT AUX1– VIDEO IN –AUX2 AUDIO IN CAMERA UNIT
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB
RGB OUT
IR OUT
1 2
ISDN
line
4
ISDN Unit**
* supplied
** not supplied
2 3
Connect the camera.
Connect the Camera Unit and
Communication Terminal using the
supplied camera cable.
TERMINAL VISCA OUT
Camera Unit
Camera cable*
AUDIO IN CAMERA UNIT M Communication
(PLUG
1
Terminal
100BASE-TX
10BASE-T
RGB OUT
IR OUT
1 2
* supplied
Camera Unit
3
Data Solution Box
LINE OUT OUT AUX IN MIC 1 MIC 2 MIC 3 MIC 4 MIC 5 TO PROCESSOR RGB OUT
TERMINAL VISCA OUT
PCS-C1/C1P*
MIC
(PLUG IN POWER) ISDN UNIT WHITE
1 2
BOARD
Communication Terminal
100BASE-TX DC 19.5V
10BASE-T PCS-P1/P1P
DSB
5
AC adaptor
Power cord*
PCS-AC195*
Connect the Data Solution Box.
Connect the Data Solution Box and Communication
Terminal using the cable supplied with the Data Solution
Box.
MIC 1 MIC 2 MIC 3 MIC 4 MIC 5 TO PROCESSOR RGB OUT
Data Solution Box
Interface cable
(supplied with the PCS-DSB1)
AUDIO IN CAMERA UNIT M Communication
(PLUG
1
Terminal
100BASE-TX
RGB OUT 10BASE-T
IR OUT
1 2
Used with the Data Solution Box for the first time, the
Communication Terminal may automatically upgrade the software
of the Data Solution Box. While the upgrading message is
displayed on the monitor screen, be sure not to turn off the
Communication Terminal. Doing so may cause malfunction of the
system.
Let's connect
Notes
• Be sure to turn off all the
equipment before making
PCS-DSB1**
any connections.
• Do not connect/disconnect
the camera cable or the
interface cable with the
power on. Doing so may
damage the Camera Unit,
Communication Terminal or
ISDN Unit.
4
Connect the ISDN Unit.
1 Connect the ISDN Unit and Communication Terminal using the interface cable
supplied with the ISDN Unit.
2 Connect the ISDN Unit to an ISDN line using an ISDN modular cable (not supplied).
Communication
Terminal
MIC
(PLUG IN POWER) ISDN UNIT WHITE
1 2 BOARD
DC 19.5V
DSB
1 2 3
to ISDN 1-3
Interface cable
1 2 3 4
(supplied with 1
to ISDN 1-6
the ISDN Unit)
ISDN modular cable**
ISDN Unit
(rear)
Used with an ISDN Unit for the first time, the Communication Terminal may automatically upgrade the
software of the ISDN Unit. While the upgrading message is displayed on the monitor screen, be sure
not to turn off the Communication Terminal. Doing so may cause malfunction of the system.
** not supplied
1
Connect the TV monitor.
Connect the TV monitor and Communication Terminal using the
supplied audio cable and S-video cable.
AUDIO IN S-VIDEO IN
TV monitor L R
Audio cable*
Communication AUDIO OUT AUX1– VIDEO IN –AUX2 AUDIO IN
Terminal
(MIXED)
VIDEO OUT
AUX MAIN– MONITOR– SUB RGB OUT
* supplied
5
Connect the AC adaptor.
Connect the supplied AC adaptor to the
Communication Terminal, and then plug the power
cord into a wall outlet.
ISDN Unit
(front)
N CAMERA UNIT
IR OUT
PCS-B384** 1
5 6 PCS-B768**
to ISDN
2
line
* supplied
S-video cable*
• When connecting a second monitor,
use the VIDEO OUT MONITOR SUB
or the RGB OUT connector on the
Communication Terminal, or the RGB
OUT connector on the Data Solution
Box. For details, refer to the Operating
Instructions.
• The AUDIO OUT (MIXED) jack is used
to make an audio recording of a
conference. This is not used during
regular conferences.
Communication
Terminal
MIC
(PLUG IN POWER) ISDN UNIT WHITE
1 2
BOARD
100BASE-TX DC 19.5V
10BASE-T
DSB
2
AC adaptor*
Power cord*
to a wall outlet
(100 - 240V AC)