Advertisement
(1) Installation
Power source:
1) Use a power source with a stable voltage.
2) Use a power source which is independent from other
equipment.
Installation:
Install the recorder on a stand 75 cm to 80 cm high.
Avoiding installing the machine in any of the following places:
1) Places where it may be exposed to the direct rays of the sun or
high temperature such as a heater.
2) Places where temperature are extremely high.
3) Places where it may be exposed to rain water or high humidity
conditions, resulting in condensation.
(3)Wall Mounting
1) Place 3 screws about 95 cm to 125 cm above the floor.
2) Hook the unit on the screws through the holes on the back cover,
as shown in the figure.
4
Advertisement
