Advertisement
4. SPECIAL FUNCTIONS:
1) Synchronies: Press the "PRO" button to enter P3, then press F3
button to advance the clock one minute and the clock will begin at
00 seconds. Each time the F3 button is pressed, the clock
advance one minute.
2) Second reset: Press the "PRO" button to enter P3, then press F4 button
to stop the second counting and the clock will automatically start from
00
seconds.
3) Horizontal adjust: If the printing is off the center of the column, perform
the following to adjust it. Press the "PRO" button to enter P3
programming status, then press the "F2" button. Use the + or - button to
move to the desired value and press the "E" button to register it. The
initial value is 50.
Increase the value larger than 50 will print rightwards. Decrease the
value smaller than 50 will print leftwards. Value +1 or -1 will adjust the
print 0.125mm each.
4) Vertical adjust: If the printing is off the center of the row, perform the
following to adjust it. Press the "PRO" button to enter P3 programming
status, then press the "F5" button. Use the + or - button to move to the
desired value and press the "E" button to register it. The initial value is
50.
Increase the value larger than 50 will print upwards. Decrease the value
２
３
４
５
６
７
８
９
１０
１１
１２
１３
１４
１５
１６
23mm
23
Advertisement
