Advertisement
smaller than 50 will print downwards. Value +1 or -1 will adjust the print
0.5mm each.
5) RESET switch: Press the SW1 switch on the main PC board, all of the
data is removed and back to initial value.
5. HOW TO CONNECT AN EXTERNAL SIGNAL UNIT
The connecting wires of output time signal are under the time recorder.
Please install the external signal unit referring to the follow drawing.
If the current consumption of external siren or bell exceeds 1A, you
are requested to install an additional relay to control buzzer.
The power supply of external siren or bell must be independent.
Time
recorder
Time recorder
BZ
Electrical siren
24
AC
Source
Advertisement
