Advertisement
8. TROUBLESHOOTING
1) The time recorder doesn't accept time card:
a. Power failure, or
b. The power cord is disconnected, or
c. Time card sensor malfunctions, please contact immediately the
dealer from whom you bought the time recorder.
2) A long "beep" is heard without printing:
The card was inserted backwards, please insert the card the other way
round. If the time recorder does not return to normal, please contact
the dealer.
3) Incorrect printing:
Incorrect setting of time, please reset the time.
4) The printing position is wrong:
Incorrect setting of pay period ending date, etc. Please set them
correctly.
5) Light printing:
a. The ribbon is worn out, please replace the ribbon cassette.
b. The ribbon cassette is not set correctly, please set it.
6) Printed time does not agree with the clock displayed time:
Disconnect the power and re-plug it. If the LCD displays EC0, the clock
movement malfunctions. Please contact the dealer.
7) The time recorder does not run:
a. Check if the fuse on the power supply PC board blow out.
b. Press the RESET button on the main PC board. If it does not work,
please contact the dealer.
8) List of error codes:
a. EC0: Error of clock movement (Maybe clock sensor pc board).
b. EC1: Error of motor (Maybe horizontal motion is not smoothly).
c. EC2: Error of motor (Maybe vertical motion is not smoothly).
d. EC3: Error of time card detection sensor (Maybe sensor surface
dirty).
Caution: Improper connection or disposal of rechargeable battery may
Result in fire or explosion. Replace with Ni-Cd, type J-AA,
900mAH ＊ 12, rate at 1.2V.
27
Advertisement
