LG WDC1409HCW Owner's Manual page 14

Connecting Hose to Water Tap
Connecting Screw-Type Hose to a Tap
with a Thread.
Screw the hose connector onto the water
supply tap.
Connecting Screw-Type Hose to Tap
Without Thread
1
Loose the four fixing screws.
Upper
connector
Fixing screw
2
Remove the guide plate if the tap is too
large to fit the adapter.
Guide plate
14
3
Push the adapter onto the end of the tap so
that the rubber seal forms a watertight
connection. Tighten the four fixing screws.
4
Push the supply hose vertically upwards so
that the rubber seal within the hose can
adhere completely to the tap and then
tighten it by screwing it to the right.
Connecting One Touch Type Hose to
Rubber
seal
Tap Without Thread
1
Unscrew the adapter ring plate and loose
the four fixing screws.
Plate
Supply
hose
Ring plate
EN