Power Supply - bca Tracker2 Owner's Manual

Familiarization
Operating Instructions
Figure B
Waist Strap
To search, remove Tracker from pouch, but keep harness and
lanyard attached to your body. If using without harness, keep
Tracker in a secure pocket, preferably in your pants or other garment
that won't be removed while traveling in the backcountry. Attach
lanyard clip to zipper or other solid fixture. If lanyard is removed from
harness or clothing for searching, keep attached to your wrist with
loop provided.

Power Supply

The Tracker2 operates with three AAA alkaline batteries. Use only
high-quality alkaline batteries of identical age and brand. Do not use
rechargeable, lithium, Oxyride, PowerPix or any other non-alkaline
battery. Replace with fresh batteries at the beginning of every
season.
In addition to being displayed at startup, the battery power level can
also be checked in transmit mode by pressing the options/SP button
z
.
If the Tracker is subjected to excessive moisture, open the battery
x
door to help allow the unit to dry. To prevent corrosion of
contacts, remove batteries during extended periods of inactivity.
The manufacturer does not warranty damage caused by battery
corrosion.
OPERATING INSTRUCTIONS
Searching
The Tracker2 operates using the 457 kHz international standard
frequency. It is fully compatible with all avalanche transceivers
adhering to this standard. Do not use with 457kHz transceivers
designed for firefighter rescue.
When searching, keep the Tracker2 at least 12" (30cm) away
from electrical equipment, including cell phones. Turn all electrical
equipment off if possible.
8
Shoulder Strap
Lanyard
Waist Attachment Buckle