D-Link DWL-G122 Quick Installation Manual page 9

Appendix B - Using the AirPlus
(continued)
• SSID: The Service Set Identifier is the name assigned to the wireless network. The
factory SSID setting is set to default. Make changes here to match the SSID on
existing Wireless Router or Access Point.
• Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used
for peer-to-peer networking.
• Channel: The default setting is set at 6.
• TxRate:The default setting is set to Auto.
• Preamble: The default setting is set to Auto.
• Power Mode: The default setting is set to Continuous Access Mode.
™
9
G Utility