Intercom PREMIUM 400 - INOX Use And Maintenance Manual page 5

Do not remove the CE MARKING plate/label and/or replace it with a different one. Should the CE MARKING
plate/label be accidentally damaged, detached from the machine or the manufacturer's seal removed, any
customer must inform immediately The Manufacturer.
Installation
Remove the package and check machine conditions. Look for possible damages caused by transport. If in doubt, do not use
the machine and contact the manufacturer.
Place
Store the machine in a place with low humidity percentage and far from heat sources.
DO NOT INSTALL THE MACHINE IN AN EXPLOSIVE ATMOSPHERE
Connections
Before connecting the vacuum packing machine, make sure voltage and sockets match.
The plate is located on either the left or right side of the stainless-steel structure.
After having checked everything, connect the plug to a current outlet of 220V
DISCONNECT THE PLUG FROM THE MAINS BEFORE STARTING ANY CHECKING OR
CONTROL PANEL
TESTING OPERATION.
5