Wegener Unity 4600 Quick Start Manual page 4

Q S G
UICK TART UIDE
Connector Designation
ETHERNET
SERIAL CONTROL
ALARM/ CUEING
DTMF*
AUDIO (same for both
ports 1 and 2)
COMPOSITE VIDEO OUT
ASI OUT
4
Type
RJ45 Jack
RS232, 9 pin D female jacks
10-pin male header (mates to
removable terminal strip)
3-pin male header (mates to
removable terminal strip)
6-pin male header (mates to
removable terminal strip)
BNC Jack
BNC Jack
800032-02 Rev. G
Pin Signal Description
1 TXDO +
2 TXDO -
3 RXDI +
4 Shorted together, then terminated into an AC ground.
5
6 RXDI -
7 Shorted together, then terminated into an AC ground.
1 DCD (internally pulled to +5V)
2 RxD (data output)
3 TxD (data input)
4 DTR (not connected)
5 GND
6 DSR (internally pulled to +5V)
7 RTS (internally pulled to +5V,may be upgraded for
handshaking)
8 CTS (not used presently, may be upgraded for
handshaking)
9 RI (internally pulled to +5V, with weak current limiting)
1 OK (COM closes here when OK)
2 COM:
3 Alarm (COM closes here on alarm or if power is off)
4 GND
5 Cue Relay #1: N.C. contact
6 Cue Relay #1: Common contact
7 Cue Relay #1: N.O. contact
8 Cue Relay #2: N.C. contact
9 Cue Relay #2: Common contact
10 Cue Relay #2: N.O. contact
1 DTMF tone, non-inverted output
2 GND
3 Alarm (COM closes here on alarm or if power is off)
1 Right '+'
2 Right GND
3 Right '-'
4 Left '+'
5 Left GND
6 Left '-'
Composite Video Output
DVB-ASI Output
www.wegener.com