Resetting The Lamp Timer - Epson PowerLite 84 Installation Handbook

Epson PowerLite 84
9. Once the lamp is fully inserted, tighten its screws.
10. Replace the lamp cover, then tighten its screw.
11. Reset the lamp timer as described page .

Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the
projector's menus.
1. Press the button on the remote control or on the
Menu
projector's control panel. You see the main menu.
2. Use the buttons on the remote control (or the arrow buttons
on the projector) to highlight
You see this screen:
, then press
Reset Enter.
INSTALLATION HANDBOOK
3. Select
Reset Lamp Hours
4. When you see the prompt, select
5. When you're nished, press
system.
Lamp and Status Information
and press .
Enter
press
Yes and Enter
or to exit the Menu
Esc Menu
.