Epson PowerLite 84 Installation Handbook page 2

Epson PowerLite 84
5. Loosen the two screws holding the lamp in place (you can't
remove them).
6. Hold the lamp as shown and pull it straight out.
7. Gently insert the new lamp. (If it doesn't
facing the right way.)
8. Push down the side marked
Loosen, but don't
remove these screws
easily, make sure it is
until it snaps in.
PUSH
INSTALLATION HANDBOOK
Lamp and Status Information
note
The lamp(s) in this
product contain mercury.
Please consult your state and
local regulations regarding
disposal or recycling. Do not
put in the trash.