Back Panel Controls - RCA pmn User Manual

Reference
OUT
TO
TV
S-VIDEO VIDEO
CH 4
IN
CH 3
FROM
ANT

Back Panel Controls

OUT TO TV Use to connect the DSS
your TV has audio/video jacks, you should use those jacks to get
better picture and sound quality.
IN FROM ANT Use to connect an off-air antenna or cable TV signal
to the DSS ® system.
CH3/CH4 SWITCH If a coaxial cable is used to connect the DSS
receiver to your TV, you must set the CH3/CH4 SWITCH. For example,
to see the DSS ® signal on TV channel 3, set the switch to 3.
S-VIDEO Provides the best picture quality. If your TV has S-VIDEO
capability, use this jack along with the audio/video jacks to connect
the DSS ® receiver to your TV.
VIDEO Provides better picture quality than the OUT TO TV jack. If
your TV has audio/video capability, use this jack to connect the DSS
receiver to your TV. You must also connect the AUDIO jacks.
AUDIO (R and L) Provide better sound quality than the OUT TO TV
jack. If your TV has audio/video capability, use these jacks to connect
the DSS ® receiver to your TV. You must also connect the VIDEO jack.
VCR CONTROL Allows the receiver to control your VCR.
SATELLITE IN Use to connect the DSS
antenna.
LOW SPEED DATA PORT this port allows you to connect the DSS
system to accessories, such as the Home Control base module.
PHONE JACK Use to connect a phone line to the DSS
®
DSS system requires a phone line connection to periodically call out
to program providers.
R AUDIO L
®
receiver to your TV. However, if
® receiver to the satellite dish
VCR CONTROL SATELLITE IN
®
®
®
® receiver. The
LOW SPEED DATA PHONE JACK
59