Home Control - RCA pmn User Manual

The Menu System

Home Control

Home Control lets you remotely control several lamps and
appliances through your DSS
Home Control setup
The Home Control Data Interface connects to the LOW SPEED
DATA port on the back of the receiver. Once connected, you
must tell the receiver to use this port for Home Control.
1. Press MENU•SELECT to bring up the Main menu.
2. Point to and select Options.
3. Point to and select System Options.
4. Point to and select Data Port and choose Home Control as
the default setting
Device Setup
1. From the Main menu select Home Control.
Home Control can control several devices.
2. Select a device you would like to control.
3. Complete the on-screen sentence using the arrow buttons
and MENU•SELECT. Press MENU•SELECT to scroll through the
lists of appliances and locations.
Keep track of devices by assigning a label.
52
®
receiver.
To control devices, you must
connect a Home Control Data
Interface to the receiver and a
remote module to the device you
want to control. The Home
Control Data Interface connects to
the LOW SPEED DATA port on the
back of the receiver.
LOW SPEED DATA PORT
Once connected, you must tell the
receiver to use this port for Home
Control.
These devices are available as
accessories sold through your
digital satellite dealer or the
accessories order form at the back
of this book.