Dell 5000 Installation And Operation Manual page 27

Watchdog timer
The watchdog timer for Windows Embedded Standard 7 P/E. is enabled and disabled through the BIOS. Enter the BIOS during boot
by pressing F2. Select System Configuration → Watchdog Timer Support → Enable Watchdog Timer in the BIOS setup program.
The Watchdog Timer feature is used to recover the operating system during the following instances:
• During POST of the computer to ensure that the computer initialization is completed properly by the BIOS/UEFI.
• During the transition from BIOS/UEFI to the operating system through an operating system Watchdog Timer driver.
In both instances, without any human intervention, the Watchdog Timer reacts when the computer is not responding. The Watchdog
Timer is enabled and disabled under the BIOS setting Watchdog Timer.
TPM support
Windows Embedded Standard 7 P/E. supports TPM 1.2. For more information, see
cc749022.aspx.
System shutdown
Click the Start icon, then click Shut down to shut down the Embedded Box PC.
System restart
Click the Start icon, then click right-arrow next to the Shut down button and click Restart.
Configuring LAN/WLAN network
1. Click the Start icon then search for Network.
2. Open Network and Sharing Center.
3. Click Change adapter settings on the left panel.
to configure the LAN on the Embedded Box PC.
Configuring Bluetooth
1. Click the Start icon then search for Bluetooth.
2. Click Change Bluetooth settings.
Configuring WWAN (DW5580) network
NOTE: For instruction on installing the WWAN card and SIM card, see the
www.dell.com/support. After installing the WWAN module and SIM card:
1. Click the Start icon then search for Network.
2. Open Network and Sharing Center.
3. Click Change adapter settings on the left panel.
4. Locate the WWAN connection and select the entry to connect (or disconnect) to the WWAN module.
Common port mappings
Serial port mapping
The table lists the serial port mapping on the Embedded Box PC 5000, with the Dell factory installed Windows Embedded Standard
7 P/E OS.
Table 3. Serial port mapping
Serial port number
1
2
3
Port type
RS232/422/485
RS232/422/485
RS232/422/485
https://technet.microsoft.com/en-us/library/
Service manual for your system at
Connector
DB9
DB9
DB9
Device Node
COM1
COM2
COM3
27