Windows Os; Windows 7 Professional Sp1 - Dell 5000 Installation And Operation Manual

NOTE: For more information about using the DCM, see the DCM documentation available at
clientsystemsmanagement.
NOTE: Dell recommends that you create a
Follow these steps to reinstall Ubuntu Desktop:
1. Insert the bootable Ubuntu Desktop USB flash drive.
2. Turn on the Embedded Box PC.
3. Press F12 to access the boot menu.
4. Enable UEFI boot mode in System Setup and boot from the Ubuntu Desktop USB flash drive.
5. Select Dell recovery to start the Ubuntu Desktop installation.
6. Select the drive onto which you want to install the Ubuntu Desktop operating system.
7. After the installation is complete, restart the Embedded Box PC.
8. Follow the instructions on the screen to configure the Language, License Agreement, Location, Keyboard Layout, and User
name/password settings.
The Embedded Box PC restarts to boot Ubuntu Desktop successfully.

Windows OS

Windows 7 Professional SP1

Overview
The Embedded Box PC is shipped with Windows 7 Professional SP1. For more information, see
us.
Boot up and log in
Before configuring the Windows 7 Professional SP1, connect a keyboard, mouse, and monitor to the Embedded Box PC. Turn on the
Embedded Box PC to boot into Windows.
1. Select regional settings.
2. Create a user account.
3. Read and agree to applicable End User Licence Agreements.
4. Select your preferred settings.
NOTE: Connect to a wireless network if available.
Restoring Windows 7 Professional SP1
You can restore Windows 7 Professional SP1 on the Embedded Box PC by using the recovery OS image on the boot partition, which
resets the run-time image back to the factory image.
Connect a keyboard, mouse, and monitor to the Embedded Box PC. Boot to the recovery environment by following these steps:
1. Turn off your computer.
2. Turn on the Embedded Box PC.
3. When the Dell logo appears on the screen, press F8 several times to open the Advanced Boot Options menu.
4. Use the arrow keys to select Repair Your Computer and press Enter.
5. From the System Recovery Options menu, select a keyboard layout, and then click Next.
6. On the next screen, log in as a local user or the Administrator.
7. From the Recovery options menu, select Factory Image Restore.
8. Click Next to open the Confirm Data Deletion menu.
9. Select the Yes, reformat hard drive and restore system software to factory condition check box and click Next.
recovery USB flash drive
www.dell.com/
before installing Ubuntu Desktop for the first time.
https://support.microsoft.com/en-
21