Bottom View - Dell 5000 Installation And Operation Manual

Pin
1
2
3
Manufacturer part number

Bottom view

Features
1 GPIO-in 8-pin port
2 GPIO-out 8-pin port
3 USB 2.0 ports (4)
4 Network status light one
5 Power status light
6 Hard-drive activity light
7 Network status light two
8 Mobile broadband antenna port two
9 RS232/RS422/RS485 port four (configurable in
the BIOS)
10 Mobile broadband antenna port one
11 RS232/RS422/RS485 port three (configurable in
the BIOS)
1, 2, 4
2, 3, 4
Polarity
Negative
Ground
Positive
ACES 59126-0023C-P01
https://acesna.com/
NOTE: This part number is for reference only and is
subjected to change.
Connect to a GPIO-out enabled device or dongle. For more
information, see GPIO-in connector
Connect to a GPIO-in enabled device or dongle. For more
information, see GPIO-out connector
Connect USB enabled devices. Provides data transfer speeds up
to 480 Mbps.
Indicates the network activity of network port one.
Indicates the power‑state of the Embedded Box PC.
Turns on when the Embedded Box PC reads from or writes to the
internal storage device.
Indicates the network activity of the network port two.
Connect a mobile broadband antenna to increase the range and
strength of the mobile broadband signals.
Connect an RS232/RS422/RS485 cable to the Embedded Box
PC. For more information, see
mapping.
Connect a mobile broadband antenna to increase the range and
strength of mobile broadband signals.
Connect an RS232/RS422/RS485 cable to the Embedded Box
PC. For more information, see
mapping.
mapping.
mapping.
RS232/RS422/RS485 connector
RS232/RS422/RS485 connector
9