Page 1
Roland XF-640 Printer InkTec SubliNova Ink User Monthly Maintenance Guide...
Page 2
InkTec Monthly Maintenance Guide Step 1. : Move the Head Carriage Please follow the instructions below to move the head carriage. After “MOVE CARRIAGE TO AVOID WIPER” is displayed, push the head carriage to the right to move. When the head carriage is detached, move it to the left and prepare for the next maintenance step.
InkTec Monthly Maintenance Guide Step 3. : Cleaning the Wiper Coat the tissue paper with SWA and clean the front and back of the wipers. * If the wipers are not cleaned regularly the nozzles can't be recovered even after cleaning. Step 4.
InkTec Monthly Maintenance Guide Step 5. : NOZZLE WASH 1) Use tongs to clamp the pump line to prevent SWA draining from the CAP. 2) Pour SWA into the top of the two clean CAPS until full. 3) Move the head carriage to the CAP and perform a nozzle wash for ten minutes.
Page 5
InkTec Monthly Maintenance Guide Step 7. Checking the nozzle Return the head carriage where it was. Perform cleaning and check the nozzles. InkTec Co., Ltd. 108, Neungan-ro, Danwon-gu, Ansan-si, Gyeonggi-do, 425-839, Korea www.inktec.com...