Scan Button; Memory Button; Enter Button; Lock Button - Ranger RCI-2950 Service Manual

17. SCAN BUTTON:

This is used to scan frequencies in each band segment. The OPERATION segment of this manual provides
detailed information on using the SCAN control.

18. MEMORY BUTTON:

This button is used to program memory channels. Detailed information on how to use this control is provided in the OPERATION
section of this manual.

19. ENTER BUTTON:

This is used to program frequencies in memory. See the OPERATION section of this manual for more information on using this
control.

20. LOCK BUTTON :

This button is used to lock a selected frequency. Press it activate the switch. In this position, it disables the Frequency Selector
Control, up/down buttons on the front control panel, or remote up/down buttons on the microphone. Repressing the switch will
unlock the frequency.
21. UP/DOWN SELECTORS:
These buttons are used to move frequency upward or downward to select a desired frequency.
22. METER:
This meter indicates received signal strength, transmitter RF output power and SWR level.
23. LCD DISPLAY:
The LCD displays the frequency selected, functions and memory channel.
24. MIC JACK:
Accepts 6 pin female connector with a type Philmore T6160 and Calrad 30445 to be connected.